GPON

• Made of high quality engineer plastic material (ABS), Good mechanical strength, elegant appearance, sturdiness and durability. 
• The faceplate can accommodate two optical fiber single mode SC adaptor outlet for the termination of 2 fibers.
• Provide a minimum fiber-bending radius of 25mm.
• Have a splice holder for store the splicing protector.
• Offer multiple cable entrances through the base and /or sides.
• Have a cable-locking mechanism to hold a wide range from 2.8mm to 3.8mm fiber drop firmly and properly so as to avoid any sharp edge and excessive strain to damage the cable.
• Have sufficient space and facilitate with wiring guide for storing 2 x 0.5m long of 900m tight buffer fibers.
• Materials of the faceplate shall be ABS UL94V-0 molded, white and glossy.
• Application: indoor 
• Insertion loss: less than 0.2dB 
• Return loss: >50dB at room temperature 
• Material: white flame retardant ABS plastic 
• Tensile strength: >20N 
• Port number: 2 
• Installation method: screw fixation 
• Product dimensions: 86 x 86 x 24 mm 

Fiber optic splice closure (FOSC) is mainly applicable to the straight-through and branching
of aerial cables, buried cables and duct cables, as well as the protection on cables joints.Mechanical seal can be reopen which make maintenance and capacity increasing more convenience 

• Straight-through, branching, splitter, splicing and adaptation is available 
• Supports loose tube cable, slotted core cable, drop cable
• Application Environment: aerial, buried and manhole
• Stackable splice tray, easy open and maintenance
• Compatible with Ribbon & most common cable types
• Dimensions and safety meets international standards
• Constructed of non-corrosive materials
• Splice tray can be easily increased and reduced according to capacity
• Bending radius of fibers in any place is greater than 30mm 
• Recommendation of life span for 25 years (depends on environment) 

• Indoor embedded, or wall installation 
• High quality metal sheet material as body of the box, sturdiness and durability, high strength engineering plastic as cover of the box, elegant appearance and durability
• Flip structure, provides space for modem, router, and other modules
• The box door opening Angle is greater than 150°, easy operate and maintain conveniently
• Fiber routing reasonable, bending radius of fibers in any place is greater than 30mm
• Inside, the inside of the box can be equipped with according to the need to install TV, Telephone, Aux and Network communication modules
• Equipped with three power outlets
• Function of secure and reliable optical fiber connection and storage

• Network Cabinets are of standard 19” installation cabinet, fully closed.
• Front door with glass and metallic frame
• The set point, multiple user information ports and Telecommunications chassis can be used to configure with TIA/EIA-568-C/569-C and 942 regional distribution system
• Easy operation and high flexibility, suitable for frequent changes of the organization office
• Modular type, removable doors and appropriate locking system
• Fast and convenient mobile, expansion and change, to meet the current needs of customers and the future demand of technology deployment flexibility
• To solve the congestion problem of telecommunication room
• Lower installation cost infrastructure upgrade or reconfiguration
• End to end network integrated solutions, combined with the structured cabling system and wireless network equipment and effective